需要金幣:![]() ![]() |
資料包括:完整論文 | ![]() |
![]() |
轉換比率:金額 X 10=金幣數量, 例100元=1000金幣 | 論文字?jǐn)?shù):9816 | ![]() | |
折扣與優惠:團購最低可5折優惠 - 了解詳情 | 論文格式:Word格式(*.doc) | ![]() |
摘要:本實驗由AT89S52單片機、點陣8*8芯片、74HC373鎖存器、74HC154譯碼器組成。在開發板上面先測點陣點亮坐標位置,以及了解點陣驅動電路,通過PO,P2口控制LED點陣列顯示情形,P1口接4線16譯碼器控制行向量顯示情況。先通過顯示數字,后來顯示漢 字。 關鍵詞:AT89S52單片機、 16*16點陣、 74HC373鎖存器、 74HC154譯碼器
Abstract: The experiment was conducted by the microcontroller AT89S52, dot matrix 8*8 chips, and 74HC373 latch, 74HC154 decoder composition. Dot lights up the coordinates of the location above the first measure in the development board, as well as to the understand the dot matrix driver circuit, control the display of the LED array of points situation by P0,P2 mouth,P1 port connected to the line 16 decoder control the vector display. First through the digital display, then display Chinese characters. Key words: AT89S52 microcontroller、 16*16 dot matrix、 74HC373 latch、74HC154 decoder
組合型led點陣顯示器以發光二極體為圖素,它用高亮度LED晶粒進行陣列組合后,再透過環氧樹脂和塑模封裝而成。具有高亮度、功耗低、引腳少、視角大、壽命長、耐濕、耐冷熱、耐腐蝕等特點。由LED點陣顯示器的內部結構可知,器件宜採用動態掃描驅動方式工作,由於LED管芯大多為高亮度型,因此某行或某列的單體 LED驅動電流可選用窄脈沖,但其平均電流應限制在20mA內,多數點陣顯示器的單體LED的正向壓降約在2V左右,但大亮點∮10的點陣顯示器單體 LED的正向壓降約為6V。大螢?zāi)伙@示系統一般是將由多個LED點陣組成的小模組以搭積木的方式組合而成的,每一個小模組都有自己的獨立的控制系統,組合在一起后只要引入一個總控制器控制各模組的命令和資料即可,這種方法既簡單而且具有易展、易維修的特點。 |