需要金幣： 1000 個金幣 |
資料包括：完整論文 |  |
 |
| 轉換比率：金額 X 10=金幣數量， 例100元=1000金幣 | 論文字?jǐn)?shù)：14347 |  | |
| 折扣與優惠：團購最低可5折優惠 - 了解詳情 | 論文格式：Word格式(*.doc) |  |
摘要:在穩態法的前提下，TC-3B導熱系數儀采用開啟風扇和不開啟風扇兩種方法，DR-II導熱系數儀采用電壓調為200V使加熱盤溫度達到80℃再把電壓調為100V,電壓調為100V，電壓調為150V三種方法，對各種材料的導熱系數進行測量，通過對測量結果以及達到穩態所用時間的比較分析得出在測量方面哪種方法好以及哪套儀器好的結論以及儀器需要改進的地方。 關鍵詞：穩態法；導熱系數；測量
Abstract:With the premise of steady-state method, there are two kinds of methods to utilize the TC-3B thermal conductivity meter. They are the use of the meter with its ventilator open and the use of the meter without its ventilator open. The DR-II thermal conductivity meter works to heat the platen to 80℃ with the voltage of 200V, then switch the voltage to 100V, then to 100V, and then to 150V. The present study will measure the coefficient of heat conductivity of several different kinds of materials. Through the analysis and discussions of the data and founding, as well as the time period of becoming steady state from measuring, the author will make a conclusion about the better meter and the better measuring method. Some suggestions are also offered to improve the measurement with thermal conductivity meter in steady-state method. Keywords: Steady-state method; Coefficient of heat conductivity; Measurement |
