需要金幣： 1000 個金幣 |
資料包括：完整論文，開題報告，任務書 |  |
 |
| 轉換比率：金額 X 10=金幣數量， 例100元=1000金幣 | 論文字?jǐn)?shù)：16465 |  | |
| 折扣與優惠：團購最低可5折優惠 - 了解詳情 | 論文格式：Word格式(*.doc) |  |
摘要:介紹了三相異步電機的結構和原理，以及幾種常見的交流調速系統，并著重闡述了調壓調速系統。通過對調壓調速系統各模塊的分析，利用Matlab/Simulink建立了三相異步電機調壓調速系統開環和閉環模型，得出了兩種情況下的仿真結果，并對結果進行了分析、比較。本次仿真運用了軟件中許多現成的模塊，并將實驗中所建模塊封裝起來，以便下次使用。使用時只需調出所需模塊并置入相應的電機參數，就可方便地進行仿真，而且仿真的各變量結果可靠、穩定，證明該模型具有快捷、靈活、方便、直觀等一系列優點。通過對三相異步電機的調壓調速系統的仿真，驗證了建模方法的有效性，并為以后在此基礎上進行其他電機或調速系統研究提供了借鑒和方便。 關鍵詞：三相異步電機；調壓調速；Matlab/Simulink；仿真
Abstract:Three-phase asynchronous motor is introduced the structure and principle, and several common exchange speed control system, and discusses the pressure regulating speed regulation system. Through to the pressure regulating speed regulation system of each module in analysis, using Matlab/Simulink established a three-phase asynchronous motor speed system pressure regulating open loop and closed-loop model, it is concluded that the two cases of simulation results, and the results are analyzed and compared. The simulation using the software many ready-made module, and will be built in the experiments that module package up, so that the next time use. Use only needed module and inserting accesses the corresponding motor parameters, can be convenient to the simulation, and the simulation results of the variables reliable, stable, prove the model has a fast, flexible, convenient, intuitive and so on a series of advantages. Through the surge of three-phase asynchronous motor speed system of simulation proves the validity of the method of modeling, and is later on that basis other motor or speed regulation system provides a reference for research and convenient. Key words：three-phase asynchronous motor；voltage control；Matlab/Simulink；simulation
在用SIMULINK工具箱對開閉環系統進行仿真時，各模塊均可從SimPowerSystem和Simulink模塊庫中找到。為了簡化仿真模型，可先將同步六脈沖觸發器電路和三相交流調壓電路進行封裝，使用時直接打開即可。需要注意的是，不僅各個模塊間的連線要正確，各個模塊的調節參數也必須互相匹配，如果不太匹配，那么這個系統的性能就會受到很大影響，往往會得不到想要的仿真結果。在調試當中往往會遇到這樣的問題：電路的連接明明是對的，但是仿真結果就是不理想。后來查看了很多的資料才知道是各個模塊的參數沒有整定好，最后在老師的指導下下，不斷更改相關參數設定，才得到了預期的仿真結果。所以，實驗的成功，不僅僅要有正確的連線，參數的設定非常重要，我們要通過不斷改變參數來實現實驗的優化。
|
