需要金幣： 1000 個金幣 |
資料包括：完整論文 |  |
 |
| 轉換比率：金額 X 10=金幣數量， 例100元=1000金幣 | 論文字?jǐn)?shù)：13404 |  | |
| 折扣與優惠：團購最低可5折優惠 - 了解詳情 | 論文格式：Word格式(*.doc) |  |
摘 要:本次畢業設計的題目是：油井刮蠟裝置設計。此設計是針對于自噴井構思的一個機械自動刮蠟裝置。刮蠟裝置由地面提升絞車、井口防噴管、井內刮蠟器、井內加重件和程序控制等組成。由程序控制地面提升絞車的正反轉，由鋼絲牽引著油管內的刮蠟器作上下往復運動，將油管內壁結的蠟刮掉。用戶只需設定刮蠟時間和刮蠟次數，就可利用該裝置實現自動刮蠟。首先通過所學內容結合查找資料設想可行性方案，在進行分析，方案對比，選材，零件結構的設計，主要零件校核，以保證設計合理實用。此設計中地面提升絞車的設計最為復雜，是主要設計部分，其中零件多，因此對其進行了仔細的分析。最后設計出滿足課題要求的一種機械自動刮蠟裝置。 關鍵詞：刮蠟器 絞車 防噴管 防噴盒
Abstract:The topic of this graduation design is: oil well paraffin device design. This design is for flowing well conceived a mechanical automatic scraping wax device. Paraffin device by ground hoist, wellhead lubricator, borehole scraper, borehole aggravating piece and process control, etc. By program control ground hoist positive &negative, by wire pulling scraper for reciprocating movement up and down within the tubing, the junction of tubing inwall proves the scrape wax. Users only need to set the time and the number of paraffin wax, to use the device automatically scraping wax. First information via the learned information combined with the feasibility plan, in the analysis, scheme comparison, select material, parts structure design, main parts, to ensure that the design is reasonable and practical. Ground in the design of the hoist in the design of the most complex, is the main part design, including parts, more so on the careful analysis. Final design could satisfy the requirement of subject a scraping wax mechanical automatic device. Keywords: wax scraper；winch；lubricator；swab lubricator |
