需要金幣： 1000 個金幣 |
資料包括：完整論文 |  |
 |
| 轉換比率：金額 X 10=金幣數量， 例100元=1000金幣 | 論文字?jǐn)?shù)：11328 |  | |
| 折扣與優惠：團購最低可5折優惠 - 了解詳情 | 論文格式：Word格式(*.doc) |  |
摘 要:本課題是以UG為平臺，利用UG/Open API二次開發工具，對鍵槽拉刀進行參數化設計。鍵槽拉刀是一種常用成形刀具，其特點拉削余量大，加工精度高。但是鍵槽拉刀結構十分復雜，所以采用傳統刀具的設計方式成本很高，設計效率低。因此，我們采用鍵槽拉刀的參數化設計就可以彌補上述缺點。其主要方法是通過UG進行幾何建模，進行尺寸約束，然后通過VC與UG/OPEN API 配置好的環境制作對話框。最后在VC中寫入對應的程序，編譯連接到UG中，通過對話框輸入?yún)?shù)驅使模型更新，從而實現鍵槽拉刀的參數化設計。 關鍵詞：鍵槽拉刀 UG/Open API 參數化設計
ABSTRACT:This topic is based on UG platform, the use of UG/Open API secondary development tools, parametric design was carried out on the keyway broach. Keyway broach is a kind of common forming cutter, the features of broaching big allowance, high machining accuracy. But the keyway broach structure is complex, so the traditional way of the design cost is very high, the low design efficiency. Therefore, we adopt the keyway broach parametric design can make up for the shortcomings. The main methods for geometric modeling by UG, make dimensional constraint, then through VC with UG/OPEN API configured dialog environment production. Finally corresponding written into the VC program, compile connected to UG, through dialog input parameter driven model from the damage to the heavier build, so as to realize parametric design of keyway broach. Keywords: keyway broach；UG/Open API；parametric design |
