需要金幣： 1000 個金幣 |
資料包括：完整論文 |  |
 |
| 轉換比率：金額 X 10=金幣數量， 例100元=1000金幣 | 論文字?jǐn)?shù)：10395 |  | |
| 折扣與優惠：團購最低可5折優惠 - 了解詳情 | 論文格式：Word格式(*.doc) |  |
摘要:本設計設計了一臺注塑模具來制造拇指訂書機上外殼。本文開篇對此次選題的意義進行了闡述，然后根據對拇指訂書機上外殼的外觀觀察及相關尺寸的測量，進行了材料的選擇，注塑機的選擇及后面的相關模具的設計。 第一章首先介紹了本設計的選題目的及意義，闡述了注塑模具的發展?fàn)顩r，接有談到我國塑料模具產業的概況及應用背景，最后構想了注塑模具的發展趨勢。 第二章是模具實體組件的設計及數據校核部分。根據對拇指訂書機的觀察及測量選定合理的材料，及相適應的注塑機，并對其相關的數據校核，接著對模具的型腔布局及分型面進行了設計。 第三章是是通過UG將之前的設計可視化，通過這章就能更直觀的了解此次設計。 第四章則是對本次設計的一些成果展示，包括裝備三維圖，零件三位圖等。 第五章，也是最后一章，這一章則是對本次設計一些總結，包括對設計中的不足之處和一些可取點。 關鍵詞：拇指訂書機上外殼；注塑模具；模架；注塑機
Abstract:This article design an injection mold to manufacture the shell on a thumb stapler. This article begins with the significance of the topics described, then the appearance of the shell on a thumb stapler observation and size measurement, material selection, the choice of the injection molding machine and the back of the mold design. The first chapter introduces the purpose and significance of the topics of this design, described the development of the injection mold, then talked about the profile and background of the plastic mold industry in China, the last idea of the development trend of the injection mold. The second chapter is part of the design of the mold the physical components and data check. Reasonable material, selected based on the observation and measurement of thumb stapler adapted to injection molding machine, and its related data checking, and then design the layout of the mold cavity and parting surface. The third chapter is by UG design visualization, this chapter can be more intuitive understanding of the design. The fourth chapter is to show some of the results of the design, equipped with three-dimensional map, part three maps. Chapter V, the final chapter, this chapter is conclusive on the design, including design inadequacies and some useful points. Keywords: Thumb stapler on the shell;Injection mold;Mold;Injection molding machine
|
